ISO SC208-2RS deep groove ball bearings

Fillet Radius ra:0.79 mm; Basic Dynamic Radial Load Rating C:14000 N; Grease Speed Rating Open/Shielded n1:11000 rpm; Sealed Speed Rating n3:7500 rpm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:13000 rpm; Width Plain B:9.5 mm; d:31.800 mm; Shielded or Sealed B1:12.7 mm; Basic Static R

d:90.000 mm; Oil Speed Rating n2:3600 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2600 rpm; Basic Dynamic Radial Load Rating C:178000 N; Fillet Radius ra:2.00 mm; B:60.00 mm; Basic Static Radial Load Rating Co:190000 N; D:160.0000 mm;

da:136.525 mm; P90°:207 kN; P180°:145 kN; End plug (suffix Y):EPR 16; RG:3/4 NPT; PG:1/4 NPT; h:51.594 mm; H:338.137 mm; Cap bolt, SAE grade:8; Initial grease fill:793.8 g;

P150°:136 kN; Bearing limiting speed:2400 r/min; ba:78.581 mm; Mass pillow block:217 kg; A1:190.5 mm; Adapter sleeve assembly:SNW 38x6.13/16; h:61.913 mm; Da:339.999 mm; H:398.462 mm; P180°:160 kN;

G:M 140x2; d1:125.412 mm; B:28 mm; B1:82 mm; Mass adapter sleeve assembly:3 kg; Lock nut:KMFE 28; d3:180 mm; Hydraulic nut:HMV 28 E; d:140 mm;

B2:18 mm; B1:11 mm; Mass angle ring:0.97 kg; d1 ≈:179.6 mm; r3,4 min.:3 mm; d:140 mm;

D2 ≈:12.2 mm; Calculation factor kr:0.03; D:14 mm; Da max.:12.4 mm; Basic static load rating C0:0.26 kN; Fatigue load limit Pu:0.011 kN; ra max.:0.2 mm; da min.:6.6 mm; Basic dynamic load rating C:0.761 kN; Limiting speed:67000 r/min;

a:6.35 mm; Limiting speed:2800 r/min; B:92.075 mm; A:69.85 mm; Basic dynamic load rating C:158 kN; S:0.794 mm; da:68.263 mm; A5:38.1 mm; A6:26.988 mm; J:152.4 mm;

d:460 mm; Locking device:MS 3092-88; Mass adapter sleeve assembly:62.7 kg; B5:77 mm; A:6.5 mm; d1:430 mm; G:Tr 460x5; G2:M 8; Hydraulic nut:HMV 92E; B:60 mm;

Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:42300 N; d:75.000 mm; D:130.0000 mm; B:16.00 mm; Basic Static Radial Load Rating Co:36000 N; Grease Speed Rating Open/Shielded n1:5100 rpm; Oil Speed Rating Open/Shielded n2:6200 rpm;

Calculation factor X:0.35; d2 ≈:61.13 mm; Calculation factor Y0:0.26; da min.:61 mm; ra max.:2 mm; rb max.:1 mm; D:110 mm; Calculation factor X:0.57; Limiting speed:6000 r/min; Basic static load rating C0:47.5 kN;

Da max.:56 mm; Housing washer:GS 89310; ra max.:1.1 mm; d:50 mm; D1:52 mm; Reference speed:1600 r/min; Limiting speed:3200 r/min; d1:95 mm; da min.:92 mm; Shaft washer:WS 89310;

P90°:60.9 kN; Cap bolt:2 x 5/8-11 UNC; J max.:295.275 mm; L:349.25 mm; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; PosiTrac Plus contact element:2 x B10724-188; ba:47.625 mm; R2:27.781 mm; H:192.484 mm;

L:419.1 mm; End plug (suffix Y):EPR 14; R1:79.375 mm; H2:53.975 mm; Eye bolt:2 x 3/8-16 UNC; Bearing:22224 EK; Labyrinth ring:2 x LOR 113; Max. speed for PosiTrac Plus seal:1350 r/min; R2:30.163 mm; Cap bolt:5/8-11 UNC;

Limiting speed:3800 r/min; F:52 mm; B:22 mm; C:22 mm; Basic static load rating C0:64 kN; r1,2 min.:0.6 mm; da min.:49 mm; ra max.:0.6 mm; Fatigue load limit Pu:7.8 kN; Da max.:64 mm;